Acquisition Announcement: Kresco Solutions Inc. Acquires International Surface Technologies (IST) 

Sandblast Parts

IST provides a wide range of universal sandblast parts, including blast nozzles, hoses, couplings, air valves, abrasive metering valves, and much more.

Remote Control Valves

Selection of heavy-duty air control valves for air inlet and/or air outlet control of pressure vessels and sandblast cabinets.

Tac3 Solenoid Pilot Valve

Allows to operate both the AV-186 Air Valve and the Abrasive Metering Valve simultaneously from the Remote Control Handle. We find this valve on RC-186 Pressure Hold System and RC-176/186 Double Control System.

AV-186 Air Valve

Allows to control the airflow through the push line. We find this valve on RC-186 Pressure Hold System and RC-176/186 Double Control System.

AV-176 Combo Valve

Allows to control the airflow through the push line and the pressurization of the pressure vessel simultaneously. We find this valve on RC-176 Pressure Release System and RC-176/186 Double Control System.

Air Only / Blast On Switch Box

The air/blast switch turns the blast hose into a powerful air blower producing high velocity compressed air to blow dust off of the workpiece and to clean the floor by blowing abrasive media remains towards the nearest floor recovery hopper.

Pressurize Vessel / Depressurize Vessel Switch Box

The depressurization switch is located inside the blast booth and allows the operator to fill up its pressure pot without the hassle of leaving the booth and taking off the safety equipment.

Remote Control Handles

Range of electric and pneumatic deadman control handles for remote control of blast pots used in blast booth or on contractor jobsite.

Standard Pneumatic Remote Control Handle

Features a safety lever and a spring that immediately cut off the airflow of the push line upon the release of the handle. Not recommended when the blast hose is longer than 100 feet.

D-Shape Pneumatic Remote Control Handle

Provides an ergonomic grip on the blast hose for long-hours of blasting without fatigue.

Standard Electric Remote Control Handle

Same design as the Standard Pneumatic Handle Control Handle, the Electric Remote control is available with a 12V DC or 120V AC transformer that converts the electrical signal into a pneumatic signal. The response time on an electrical handle is faster than the one of a pneumatic handle and can go beyond 100 feet.

D-Shape Electric Remote Control Handle

Provides the same ergonomic grip as the D-Shape Pneumatic Remote Control Handle, but is supplied with an electrical to pneumatical signal converter.

Abrasive Metering Valve

Range of normally closed abrasive regulation valves that allows you to control the media feed rate that enters the push line with a high degree of precision.

MMV-175 Abrasive Metering Valve

A normally open valve that, similarly to the PMV-186, controls the abrasive media flow by the mean of a know that moves a plunger inside a urethane sleeve to control the opening of the media outlet falling into the push line.

AR-7 Abrasive Metering Valve

A normally closed valve that controls the media flow by the mean of a rubber tube that is being partially pinched by an adjustment screw on one end, and a booster cylinder on the other end.

AR-3/4 Abrasive Metering Valve

This valve is used in suction blast cabinet to adjust the amount of abrasive media being sucked by the media hose and propelled through the blast nozzle.

Suction Sandblast Guns

Selection of industrial-grade sandblast guns designed for suction sandblast cabinets.

G15 Trigger Operated Sandblast Gun

Basic trigger blast gun for suction sandblast cabinet.

G5 Foot Operated Sandblast Gun

Standard blast gun for suction sandblast cabinet controlled by a foot pedal.

Sandblast Nozzles

Wide selection of blast nozzles designed for pressure and suction sandblast systems, suited for general and specialty blasting applications. Available in ceramic, tungsten carbide, boron carbide, silicon carbide and features straight, venturi, and double venturi designs.

Straight Blast Nozzles with Focused Spray Pattern

Sandblast nozzles for suction sandblast cabinets’ blast guns. Available in ceramic, tungsten carbide, or boron carbide, and ranging from 1/4″ to 7/16″ inside diameter (ID).

Double Venturi Blast Nozzles

High productivity boron carbide blast nozzles with a urethane sleeve, designed for portable sandblasters. Available in a range of sizes, from 1/4″ to 1/2″ inside diameter (ID).

Pipe Blasting Nozzles

Tornado blast nozzles designed to blast interior surfaces of pipes ranging from 3/4″ to 60″ inside diameter (ID).

Sandblast Hoses

Robust blast hoses made from virgin natural rubber that provides flexibility, agility, and long-lasting durability. Available in 50′ sections, ranging from 1/2″ to 2″ interior diameter.

Bulk Sandblast Hoses

High resistance synthetic rubber blast hose designed for sansblasting applications. Available in a range of sizes, from 1/2″ to 2″ inside diameter (ID). Sold in multiple of 50′ only.

Hose Couplings and Nozzle Holders

Wide range couplings and nozzle holders manufactured from a variety of materials to suit different applications requirements, from lightweight nylon series for general applications to heavy-duty zinc plated steel couplings for extended durability in harsh operating environment.

Chicago Quick Release Couplings

Quick Release (QC) Chicago couplings designed to connect hoses on valves or pressurized vessels, or to link multiple sections of hoses together. Available in different sizes and materials.

Straight Threaded Nozzles Holders

Nozzle Holders (NH) couplings that provide a secure and airtight connection for a variety of threaded blast nozzles. Available in different sizes and materials.

Got Questions?

Contact one of our experts today to help you chose the right system for your application.

Request a QUOTE

"*" indicates required fields

Name*
Country*
Hidden
Hidden